QRZ! Ham Radio 4/QRZ Ham Radio Callsign Database - Volume 4.iso/digests/infoham/940183.txt

Internet Message Format | 1994-11-13 | 18KB

Date: Sun, 20 Feb 94 04:30:07 PST
From: Info-Hams Mailing List and Newsgroup <[e-mail]>
Errors-To: [e-mail]
Reply-To: [e-mail]
Precedence: Bulk
Subject: Info-Hams Digest V94 #183
To: Info-Hams


Info-Hams Digest            Sun, 20 Feb 94       Volume 94 : Issue  183

Today's Topics:
                  A transmission line loss question
                        CELLULAR SURVEILLANCE
             Good car choice for mobile (Honda Accord??)
                        ham-univ mailing list
                         Ham software for Mac
                         Hamvention Parking
                             HAM WANNABE
                   MFJ speaker/mics for Yaesu FT530
               Noise Problem (and other noise sources)
                     Scandinavian Repeater Scene?
          So what happened to the Kenwood TR-751 & TR-851 ?
                         Tone Burst Whistle?

Send Replies or notes for publication to: <[e-mail]>
Send subscription requests to: <[e-mail]>
Problems you can't solve otherwise to [e-mail].

Archives of past issues of the Info-Hams Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives/info-hams".

We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party.  Your mileage may vary.  So there.
----------------------------------------------------------------------

Date: Sat, 19 Feb 1994 00:44:17 GMT
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!vixen.cso.uiuc.edu!sdd.hp.com!hp-cv!hp-pcd!hpcvsnz![e-mail]
Subject: A transmission line loss question
To: [e-mail]

I have a perverse question about feeding an antenna with a coaxial
transmission line.  This is intended as food for thought.  (You've
been warned ;-)

Assume you have a 50 ohm antenna you want to use on a single
frequency in the two meter band.  You will be feeding it with
about 100 feet of coax, which will be cut to an exact integer
multiple number of half-wavelengths on the operating frequency.
Which of the following two transmission lines will you choose
to give lower loss?

A.  50 ohm air-insulated copper line with 1" OD

B.  75 ohm air-insulated copper line with 1" OD -- in other
    words, same line as in (A), but a smaller center conductor.

73, K7ITM

------------------------------

Date: 18 Feb 1994 23:24:11 GMT
From: swrinde!sdd.hp.com!col.hp.com![e-mail]
Subject: CELLULAR SURVEILLANCE
To: [e-mail]

What scanner users -really- need is a control circuit for various
TRUNKING systems!  How about developing a low-cost (<$100) circuit
to do that?  You listening CSI?

------------------------------

Date: Sat, 19 Feb 1994 01:15:34 GMT
From: world![e-mail]
Subject: Good car choice for mobile (Honda Accord??)
To: [e-mail]

In article <[e-mail]> [e-mail] (Mark Helfen) writes:
>Appreciate any help::
>
>I am looking for a new car. My first choice was a Honda Accord. When the
>dealer called the factory rep to ask about mobile radio installations, the
>reply was: "We don't know anything about that. We have guidlines for
>installing equipment we sell (ie: stereos) only. If you install any other
>equipment (ham equip) you are on your own. Any damage you do is your
>responsility". (not a direct quote - just my interpretation of what I
>heard)
>
>SO.... I still need a car, and would appreciate any help from people who
>have been down this path
>
>-- Have you installed a mobile rig in a recent (93, or 94) Honda, and what
>was your experience.
>
>-- Can you reccomend another car (similar size/price/quality), recent/new
>model, where you have had success with an install, and didn't fry the
>ignition computer, etc...
>
>
>Thanks for your help
>
>Mark
>
>KM6FM
>
>
>

Some Hondas are rolling wide-band RF noise sources. This is certainly
true of N1JIT's car. Honda's people at their US headquarters were rather
hostile on the telephone when I asked about the issue. With customer
service like that, I'll buy an american car next time, and the japanese
economy can continue to plummet...

I should note that Nissan of America sent a pretty good set of sheets to
me in which they indicated maximum power levels at different frequencies
that they recommend. It was generally pretty positive.

Ed Hare at the ARRL sent letters to the various auto manufacturers asking
about radio installation. The responses varied. I have a copy of the
letter from Chrysler, in which they indicate which extra ordering code
to use when ordering a new car to be built. This code will ensure the
installation of electronics modules which are specially shielded. Chrysler
has been doing a lot of work to ensure their cars do not have these
problems, too.

GM has a booklet out on the subject. I was very impressed to see a GM
booth at Dayton last year. The folks in the booth were GM hams, who were
handing out info on proper installation of radio gear.

Based on positive info from the US companies, and mixed to negative from
Honda, I'll probably buy american next time.

--
---------------------------------------------------------------
Daniel Senie                 Internet:     [e-mail]
Daniel Senie Consulting                    [e-mail]
508-365-5352                 Compuserve:   74176,1347

------------------------------

Date: Thu, 17 Feb 94 17:40:16 MST
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!cs.utexas.edu!asuvax!ennews!stat![e-mail]
Subject: ham-univ mailing list
To: [e-mail]

I need the address of the ham-univ mailing list.  Can someone mail it
asap to me, I have a problem I need the expertise of the group.

david dodell, wb7tpy

---
Editor, HICNet Medical Newsletter
Internet: [e-mail]                 FAX: [phone]
Bitnet  : ATW1H@ASUACAD

------------------------------

Date: Fri, 18 Feb 1994 21:49:28 GMT
From: swrinde!cs.utexas.edu!oakhill!spud![e-mail]
Subject: Ham software for Mac
To: [e-mail]

I'm looking for satellite tracking, DX database, packet and other radio
related software recommendations for my Mac. Please respond via email.

Thanks,
Gerald
---
Gerald W. Garcia, P.E. N5UMB            Motorola Inc., MD: TX30/OE37
Senior Design Engineer                  6501 Wm. Cannon Dr. West
[e-mail]                Austin, TX 78735-8598
[phone] (voice)                  [phone] (fax)

------------------------------

Date: Sun, 20 Feb 1994 07:27:45 GMT
From: agate!usenet.ins.cwru.edu!news.csuohio.edu![e-mail]
Subject: Hamvention Parking
To: [e-mail]

Let's see ...
     They spent $90k last year and the busses were crowded.
     They are spending about half of that this year.
     Or ..
          I can park in the mud and walk in the street.

Hmmmmm.

73,
Steve, NO8M

(Still hearing about KP4s, HCs, and other DX friends not coming
 due to this, too.)


------------------------------

Date: 20 Feb 1994 00:07:27 -0800
From: nntp.crl.com!crl2.crl.com![e-mail]
Subject: HAM WANNABE
To: [e-mail]

I've always wanted to get into HAM radio. How do I start? What do I need
to do?

------------------------------

Date: Tue, 15 Feb 94 11:46:10 EST
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!agate!linus!linus.mitre.org!mwvm.mitre.org![e-mail]
Subject: MFJ speaker/mics for Yaesu FT530
To: [e-mail]

>I am considering getting an MFJ speaker/mic...

I have one for my Yaesu. It works ok, but not great. The
sound quality is tinny and pitched toward the high end;
none of this is surprising considering the small size.
It's usable, and the small size is nice; an ok deal for
the money.

Mike, N4PDY

*These are my opinions only*

------------------------------

Date: Fri, 18 Feb 1994 19:07:12 GMT
From: psinntp!sunsrvr6![e-mail]
Subject: Noise Problem (and other noise sources)
To: [e-mail]

In article <2jqq6i$[e-mail]>,
Ignacy Misztal <[e-mail]> wrote:
>Sources of broadband noise in my house:
>1. Light dimmers,
>2. TV set,
>3. Fluorescent lights.
>
>Ignacy Misztal, NO9E, SP8FWB
>[e-mail]

I had a MOV (Metal Oxide Varistor) in a "surge supressor" go bad.  They
to into a partially-conducting mode, sorta like a SCR dimmer switch.

And some electronic ballast flourescent lights are really bad.  We have
some Lights of America flourescent lights with FCC Part-15 tags.

73...Jim
N2VNO

------------------------------

Date: Tue, 15 Feb 94 07:17:00 MST
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!cs.utexas.edu!asuvax!ennews!stat![e-mail]
Subject: Scandinavian Repeater Scene?
To: [e-mail]

I might be traveling to Stockholm, Denmark, and Norway soon.  Can anyone
fill me in on the VHF/UHF repeater situation, frequencies, tone burst
etc?

david

---
Editor, HICNet Medical Newsletter
Internet: [e-mail]                 FAX: [phone]
Bitnet  : ATW1H@ASUACAD

------------------------------

Date: Sun, 20 Feb 1994 07:19:07 GMT
From: agate!library.ucla.edu!csulb.edu!csus.edu!netcom.com![e-mail]
Subject: So what happened to the Kenwood TR-751 & TR-851 ?
To: [e-mail]

Brian Cuthie ([e-mail]) wrote:
: Upon trying to buy a Kenwood TR-851A, I was told that it was
: "quietly discontinued" by Kenwood.  Does anyone have any idea why?

I think the TR-851A only operated between 430 and 440 MHz, and probably
didn't sell very well.

Wayne Roth
WA2n

------------------------------

Date: Tue, 15 Feb 94 14:22:52 MST
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!cs.utexas.edu!asuvax!ennews!stat![e-mail]
Subject: Tone Burst Whistle?
To: [e-mail]

I have an ICOM 24AT which I would like to use with tone burst.  Is there
a way to do this easily?

I understand that someone sells a tone-burst whistle which immitates the
tone to prevent internal modification of a radio.

Anyone heard or know where I can get one of these?

david

---
Editor, HICNet Medical Newsletter
Internet: [e-mail]                 FAX: [phone]
Bitnet  : ATW1H@ASUACAD

------------------------------

Date: Fri, 18 Feb 1994 10:50:20 -0500
From: swrinde!cs.utexas.edu!math.ohio-state.edu!sol.ctr.columbia.edu!hamblin.math.byu.edu!yvax.byu.edu!cunyvm!rohvm1![e-mail]
To: [e-mail]

References <[e-mail]>, <[e-mail]>, <[e-mail]>hvm
Subject : Re: John Ramsey

In article <[e-mail]>, [e-mail] (Cecil Moore)
wrote:

>
> Your experience has been different from mine. I had 100 times the trouble
> out of Heathkits that I had with Ramsey kits. You probably weren't around
> for the '50s when it was a miracle if a Heathkit ever worked.
>

Really?!  I've built Heathkits from the original oscilloscope and AT-1
transmitter right up through their kit 2-m HT, and had _very_ few problems
that weren't my own stupidity (back in the '50's I was known to make a cold
solder joint occasionally).  Think I had one bad relay in my HW-100 that
they promptly replaced, can't recall any other problems in well over twenty
kits.

Only built one Ramsey kit, their 40-m qrp transmitter.  Very simple
circuit, but it doesn't work.  (Oscillator stage is okay, but the final
doesn't amplify.)  Haven't had a chance to troubleshoot it yet, so can't
rule out my own stupidity, but Ramsey doesn't have a good track record with
me.

--
73  de    John Taylor    W3ZID
[e-mail]

------------------------------

Date: Sun, 20 Feb 1994 07:45:50 GMT
From: news.Hawaii.Edu!uhunix3.uhcc.Hawaii.Edu![e-mail]
To: [e-mail]

References <[e-mail]>, <[e-mail]>, <[e-mail]>
Subject : Re: Spectral purity of 2m tx (was Re: RAMSEY FX TRANSCEIVER

In article <[e-mail]> [e-mail] (Dana Myers ) writes:
>
>Anyway, comparing 1kW on 11m to the amateur rules is pointless.
>Amateurs have historically been very proud of a strict compliance
>to the rules, and frequently ridicule 11m folks for not complying
>with the appropriate rules.  I should hope you aren't condoning the
>operation of radios with illegal harmonic outputs on sensitive aero bands.

Why not? You'll defend a pirate who posts 6MHz air-to-ground
frequencies on rec.radio.cb in answer to a query posted by an other
pirate as to what frequencies other illegals were using outside of
11M. Don't sound so high and mighty on here Dana while at the same time
defend illegals posting (inviting?) pirate operation on air-to-ground
channels.

Oh, and let's not forget your coming to Shoup's defense (December) after
I chastised him for stating he was going to put a 5kw xmtr on the ham
bands.

Make up your mind as to which side of the law you stand on.

Jeff NH6IL

------------------------------

Date: (null)
From: (null)
It's too bad, but we often find that the kind of independent spirit
and just plain cussed stubborness that leads a guy to go out on his
own and start a neat new business, also seems to result in a brusque
and bluff attitude towards the clientele. Somehow, Ten Tec seems to
have separated the cussed stubborn guys who can make a venture in
a niche market work, against all odds, from the kind of flexible and
accomodating folks who keep the customers happy.

Apparently, Ramsey hasn't.

Two companies. Similar beginnings. I'm afraid one is going down a very
different road than the one paved by the other.

Greg

------------------------------

Date: Fri, 18 Feb 1994 16:39:44 GMT
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!cs.utexas.edu!asuvax!pitstop.mcd.mot.com!mcdphx!schbbs!waters.corp.mot.com.corp.mot.com![e-mail]
To: [e-mail]

References <[e-mail]>, <[e-mail]>, <2k0eup$[e-mail]>
Subject : Re: Keyboards at testing sessions

In article <2k0eup$[e-mail]>, [e-mail] (Gary
McDuffie Sr) wrote:

> [e-mail] (Mike Waters) writes:
>
> >The easiest way would be to disable (remove?) the hard drive and run with
> >only the operasting system and typing software.  (Obviously *not* a morse
> >reader of any type :-)  You have to be able to demonstrate that t he hard
> >drive is empty or disabled though.
>
> Okay, what am I missing? What has the hard drive got to do with it?
> Why would you care about a hard drive? Does Seagate put out HDs that
> can copy code now? And as for a "morse reader", how would it be able
> to copy in a testing environment? This guy is sweating a test. He
> doesn't have time to load some program to help him cheat, if there was
> such a program. Just watch him like you would all the other testees,
> maybe a little closer, if you like. I think you will find that you ae
> being paranoid for no reason.

I have no idea what help someone could get from a program, that is not the
point.

My problem is that this is somewhat like the reasoning that led up to the
Challenger disaster.

The need is not to show that someone *is* or *could* cheat, but for them to
prove that they *could not* cheat..  If you want to use some piece of
equipment in a testing session *you* must show that (a) you are not using
it to cheat and (b) it won't disturb the other test takers.

Showing an empty hard drive or none at all is one very easy way to do this.
 Certainly there are other waysto do this.  Remember the onus in not on the
VEs to try to anticipate every possible way for someone to cheat, but to
ensure fair tests

------------------------------

Date: Fri, 18 Feb 1994 22:45:17 GMT
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!wupost!csus.edu!netcom.com![e-mail]
To: [e-mail]

References <[e-mail]>, <2jqu8k$[e-mail]>, <[e-mail]>com.co
Subject : Re: RAMSEY FX TRANSCEIVER

In article <[e-mail]> [e-mail] (Michael L. Ardai) writes:
>
>Why do I feel that Ten Tec is more likely to make kits that will work, meet
>FCC spec, and not thump when the squelch closes?
>
This is sort of interesting from a number of perspectives:

First, Ten-Tec got its start making kits, some QRP transceivers which
were, by some accounts, pretty horrendous as to performance and spectral
purity. You could buy anything from boards up to the complete transceiver.
The latter was pretty rinky, and sort of ignored the idea of 'shielding.'

Then came the Argonaut 505. A lot less rinky-tink but still not the
pinacle of sophisticated engineering. The 509 was better, and so on...

What's the difference between Ten Tec and Ramsey, that will probably
mean that one will still be around after twenty more years?

Well, Ten Tec is LEGENDARY for treating their customers like gold.
In fact, they do so well at this that they seem to be making a go of
it without the dealer network who, by all accounts, pushed the  higher
margin competition and whose attitudes and approaches was inferior to
Ten Tec's own.

------------------------------

End of Info-Hams Digest V94 #183
******************************